Gebruiksaanwijzing /service van het product 700 RM UPS van de fabrikant Tripp Lite
Ga naar pagina of 20
1 Owner's Manual IBM Netw ork Pr ofessional 700 RM UPS Rackmount Intelligent Network UPS System (120V) ESP AÑOL: p. 7 FRANÇAIS: p. 14 Installation: p. 3 - 4 Basic Operation: p. 4 - 6 Storage & Service: p. 6 Specifications: p . 6 Safety: p .
2 This manual contains important instructions and warnings that should be followed during the installation, operation and storage of all Tripp Lite UPS Systems. UPS Location W arnings • Install your UPS indoors, away from excess moisture or heat, dust or direct sunlight.
3 Install rack handles (supplied) and mount UPS in standard 19 in. rack using standard rack hardware (user supplied). Install your UPS in the lowest rack position possible. Plug your equipment into your UPS. Installation 1 4 2 3 System Enable Switch Located on Front Panel ("I" = ENABLE; "O" = DISABLE) T urn y our UPS ON.
4 On/Standby Switch This momentary switch controls power to the UPS receptacles. Engage it momentarily and release it to toggle between the “ON” mode (power ON at the UPS receptacles) and “Standby” mode (power OFF at the UPS receptacles).
5 Indicator Lights All Indicator Light descriptions apply when the UPS is plugged into a wall outlet and the System Enable Switch is turned ON. This green light will shine constantly to indicate AC power is available at the receptacles. It will flash to indicate AC power is not available.
6 “SMART” RS-232 Port The RS-232 port connects your UPS to any workstation or server. Use with Tripp Lite software and included cable to monitor and manage network power and automatically save open files and shut down equipment during a blackout.
7 Manual de Operación IBM Netw ork Pr ofessional 700 RM UPS No-Break Inteligente para Redes (120V) Modelo para Racks o Bastidores INGLES: p. 1 FRANCES: p. 14 Instalación Rápida: p. 9 Operación Básica: p. 10 Almacenaje y Servicio: p. 13 Especificaciones: p .
8 Este manual contiene advertencias e instrucciones importantes que deben seguirse durante la instalación, operación y almacenaje de todos los no-breaks Tripp Lite. Advertencias Sobre la Instalación de este No-break • Instale este no-break bajo techo, alejado de calor o humedad excesiva, polvo o luz solar directa.
9 Instalación Instale las asas para racks o bastidores (incluidas) y monte el no-break en un rack o bastidor estándar de 19 pulgadas utilizando tornillos para racks o bastidores estándar (suministrados por el usuario). Instale este no-break en el estante más bajo del rack.
10 Conexión al Puerto DB9 —Opcional—* Usando el cable suministrado por Tripp Lite, conecte el puerto DB9 de su servidor principal de archivos al puerto DB9 rotulado “SMART” (Inteligente), el cual provee comunicaciones completas e inteligentes tipo RS-232.
11 Luces Indicadoras Todas las descripciones de la Luces Indicadoras son efectivas mientras el Sistema UPS está conectado a una línea viva de CA y haya sido encendido (ON).
12 Puerto RS-232 “SMART” (Inteligente) El puerto inteligente RS-232 conecta su sistema UPS a cualquier estación de trabajo o servidor de archivos.
13 Almacenaje Apague el no-break: primero, mueva el Interruptor “ON/Standby” (encendido / standby) y suéltelo para pasar el modo “Standby” de operación; después, coloque el Interruptor “S.
14 Copyright ©2000 Tripp Lite. Tous droits réservés. Manuel de l’Utilisateur IBM Netw ork Pr ofessional 700 RM UPS Système d'UPS (120V) Montage en Rack à Réseau Intelligent ANGLAIS: p. 1 ESP A GÑOL: p. 7 Installation Rapide: p. 16 Opération de Base: p.
15 Sûreté Ce manuel contient des instructions et recommandations importantes qui doivent être suivies durant l’installation, l’opération et l’entreposage de tous les Systèmes d’UPS de Tripp Lite.
16 Installez les poignées du rack (fournies) et montez le système d’UPS dans un rack de 19 pouces (48 cms) en utilisant le matériel du rack standard (fourni par l’utilisateur). Installez votre système d’UPS dans la position du rack la plus basse possible.
17 Connexion du P or t DB9 –Facultatif*– En utilisant le cable Tripp Lite, branchez le port DB9 de serveur principal au port unique DB9 «SMART» (qui fournit les transmis- sions complètes inteilligentes RS- 232). * Les connexions du port série sont facultatives.
18 Indicateurs Lumineux Toutes descriptions sur l’indicateur lumineux s’appliquent lorsque votre UPS est connecté à la prise murale et sur la position MARCHE («ON»). Cet indicateur vert brillera constammant pour indiquer que les prises du système d’onduleur fournit de l’alimentation c.
19 Port Intelligent RS-232 Le port RS-232 connecte votre système d’onduleur à n’importe station de travail ou serveur. Utilisez-le avec le logiciel et le cablâge Tripp Lite pour contrôler l’alimentation du réseau, pour sauvegarder automatiquement les fichiers ouverts et pour arrêter l’équipement en cas d’une coupure de courant.
20 NP700RM Tension de Sortie (VA/Watts): 700/425 Temps Secours par Batterie (Pleine Charge/Mi-Charge), Min.: 28/12 Temps de Recharge de la Batterie: 2 à 4 heures Circuit Suggéré: 15 ampéres Homolo.
Een belangrijk punt na aankoop van elk apparaat Tripp Lite 700 RM UPS (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Tripp Lite 700 RM UPS heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Tripp Lite 700 RM UPS vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Tripp Lite 700 RM UPS leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Tripp Lite 700 RM UPS krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Tripp Lite 700 RM UPS bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Tripp Lite 700 RM UPS kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Tripp Lite 700 RM UPS . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.