Gebruiksaanwijzing /service van het product ULV Celeron M 3.5" Embedded Card With VGA/ SOUND/ LAN van de fabrikant Pro-Tech
Ga naar pagina of 74
USER’S MANUAL EB-471LF ULV Celeron ® M 3.5” Embedded Card With VGA/ SOUND/ LAN EB-471LF M1.
Copyright Notice EB-471LF Celeron® M 3.5” Embedded Card With VGA /Sound/LAN OPERATION MANUAL COPYRIGHT NOTICE This operation m anual is meant to assist bot h Embedded Computer manufacturers and end users in inst alling and setting up the system. The information contained in this document is subject to change without any notice.
Copyright Notice FCC NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Ru les. These limits are designed to provide reasonable protection against harm ful interference when the equ ipment is operated in a comm ercial environment.
Contents TABLE OF CONTENTS CHAPTER 1 INTRODUCTION 1-1 About This Manual ........................................................ 1-2 1-2 System Specification ...................................................... 1-3 1-3 Safety Precautions ...........
Contents CHAPTER 3 SOFTWARE UTILITIES 3-1 Introduction …………..........................................…....... 3-2 3-2 VGA Driver Utility ……………………………….…… 3-2 3-3 Flash BIOS Update ..................................
Page:1-1 INTRODUCTION This chapter gives you the i nformation for EB-471LF. It also outlines the System specification. Section includes: z About This Manual z System Specifications z Safety precautions Experienced users can skip to chapter 2 on page 2-1 for Quick Start.
Chapter 1 Introduction Page: 1-2 EB-471LF USER ′ S MANUAL 1-1. ABOUT THIS MANUAL Thank you for purchasing our EB-471LF Celeron® M3.5” Em bedded Card enhanced with VGA /Sound/ LAN, which i s fully PC / AT com patible. EB- 471LF provides faster processing speed, greater expandability and can handle more task than before.
Chapter 1 Introduction EB-471LF USER ′ S MANUAL Page: 1-3 1-2. SYSTEM SPECIFICATION z CPU : Intel® Celeron® M processor Ultra Low Voltage without L2 cache onboard Available at 600MHz System bus frequency at 400MHz Auto detect voltage regulat or z SYSTEM CHIPSET : Intel® 852GM chipset z MEMORY : Supports up to 1 GB DDR SDRAM .
Chapter 1 Introduction Page: 1-4 EB-471LF USER ′ S MANUAL z DISPLAY : Built in Intel 852GM, support CRT, LCD. z IDE INTERFACE : One IDE ports support up to two IDE devices. Supports UDMA 33/66/100. z LAN INTERFACE : Intel® 82562ET 10/100 Base-T z SOUND: AC '97 Codec.
Chapter 1 Introduction EB-471LF USER ′ S MANUAL Page: 1-5 z OPERATING TEMPERATURE : 0 to 60 ° C (32 ° F to 140 ° F) z INPUT POWER REQUIREMENT : AT power: +5V, +12V Only +5V: +5V only provi de power for SBC, It does not have enough power to support expansion card.
Page 2-1 HARDWARE CONFIGURATION ** QUICK START ** CHAPTER 2 Helpful informati on describes the jumper & connector settings, and component locati ons.
Chapter 2 Hardware Config uration Page: 2-2 EB-471LF USER ′ S MANUAL 2-1. JUMPER & CONNECTOR QUICK REFERENCE TABLE COM Port Connector ....................…..................……… COM1, COM2 RS232/422/485 (COM2) Selection ..................
Chapter 2 Hardware Config uration EB-471LF USER ′ S MANUAL Page: 2-3 2-2. COMPONENT LOCATIONS J2 1 LVDS1 2 JSFAN1 PW1 43 44 USB1 IDE1 1 2 JP1 2 1 J1 2 1 JPANEL1 COM1 COM2 2 1 JP2 J TV1 JP4 DIN1 VGA1.
Chapter 2 Hardware Config uration Page: 2-4 EB-471LF USER ′ S MANUAL 2-3. HOW TO SET THE JUMPERS You can configure your board by setti ng jumpers. Jum per is consists of two or three met al pins wit.
Chapter 2 Hardware Config uration EB-471LF USER ′ S MANUAL Page: 2-5 JUMPER DIAGRAMS 2 pin Jumpe r loo ks l i ke t his Ju mper Ca p looks like this 3 pin Jumpe r loo ks l i ke t his Ju mper Bl ock l.
Chapter 2 Hardware Config uration Page: 2-6 EB-471LF USER ′ S MANUAL 2-4. COM PORT CONNECTOR COM1 : COM1 Connector COM1 is fixed as RS-232. The pin assignment is as follows : PIN ASSIGNMENT 1 DCD1 2 RX1 3 TX1 4 DTR1 5 GND 6 DSR1 7 RTS1 8 CTS1 9 RI1 10 NC COM2 : COM2 Connector The COM2 is selectable as R S-232/422/485.
Chapter 2 Hardware Config uration EB-471LF USER ′ S MANUAL Page: 2-7 2-5. RS232/422/485 (COM2) SELECTION JP1 : RS-232/422/485 (COM 2) Selection This connector is used to set the COM 2 function.
Chapter 2 Hardware Config uration Page: 2-8 EB-471LF USER ′ S MANUAL 2-6. KEYBOARD/MOUSE CONNECTOR DIN1 : Keyboard/Mouse Connector The pin assignments are as follows : PIN ASSIGNMENT 1 KB_DATA 2 MS_DATA 3 GND 5 K/B_VCC 6 KB_CLK 8 MS_CLK 2-7. RESET CONNECTOR JPANEL1 (7,8) : Reset Connector.
Chapter 2 Hardware Config uration EB-471LF USER ′ S MANUAL Page: 2-9 2-9. EXTERNAL SPEAKER CONNECTOR JPANEL1 (5, 6) : External Speaker Connector The pin assignment is as follows : PIN ASSIGNMENT 5 SPK1 6 SPK_VCC 2-10. POWER LED CONNECTOR JPANEL1 (1, 3) : Power LED Connector The pin assignment is as follows: PIN ASSIGNMENT 1 VCC_R 3 GND 2-11.
Chapter 2 Hardware Config uration Page: 2-10 EB-471LF USER ′ S MANUAL 2-12. SYSTEM FAN CONNECTOR JSFAN1 : System Fan connector The pin assignment is as follows: PIN ASSIGNMENT 1 GND 2 +12V 3 FAN0 2-13.
Chapter 2 Hardware Config uration EB-471LF USER ′ S MANUAL Page: 2-11 2-14. HARD DISK DRIVE CONNECTOR IDE1: Hard Disk Drive Connector The pin assignments are as follows: PIN ASSIGNMENT PIN ASSIGNMEN.
Chapter 2 Hardware Config uration Page: 2-12 EB-471LF USER ′ S MANUAL 2-15. UNIVERSAL SERIAL BUS CONNECTOR USB1: Universal Serial Bus Connector The pin assignments are as follows: PIN ASSIGNMENT 1 VCCUSB0 2 USBP0N 3 USBP0P 4 GND 5 GND 6 VCCUSB0 7 USBP1N 8 USBP1P 9 GND 10 GND 2-16.
Chapter 2 Hardware Config uration EB-471LF USER ′ S MANUAL Page: 2-13 2-17. CLEAR CMOS DATA SELECTION JP3 : Clear CMOS Data Selection The selections are as follows : FUNCTION JUMPER SETTING (pin closed) JUMPER ILLUSTRATION Normal Open Clear CMOS Close *** Manufacturing Default i s set as Normal.
Chapter 2 Hardware Config uration Page: 2-14 EB-471LF USER ′ S MANUAL 2-18. POWER REQUIREMENT SELECTION JP2 : Power Requirem ent Selection The selections are as follows: Power Selection JUMPER SETTI.
Chapter 2 Hardware Config uration EB-471LF USER ′ S MANUAL Page: 2-15 2-19. AT POWER CONNECTOR PW1 : AT Power Connector The pin assignments are as follows: 2-20.
Chapter 2 Hardware Config uration Page: 2-16 EB-471LF USER ′ S MANUAL 2-21. RESET/NMI WATCHDOG SELECTION JP4 : Reset/NMI Watchdog Sel ection The selections are as follows: FUNCTION JUMPER SETTING (pin closed) JUMPER ILLUSTRATION RESET 1-2 NMI 3-4 ** Manufactur ing default: Reset.
Chapter 2 Hardware Config uration EB-471LF USER ′ S MANUAL Page: 2-17 2-22. LVDS CONNECTOR LVDS1 : LVDS Connector. The pin assignments are as follows: PIN ASSIGNMENT PIN ASSIGNMENT 1 LVDS_VCC 2 GND .
Chapter 2 Hardware Config uration Page: 2-18 EB-471LF USER ′ S MANUAL 2-23. PANEL VOLTAGE SELECTION JP5 : Panel Voltage Selection. The selections are as follows: SELECTION JUMPER SETTING JUMPER ILLU.
Chapter 2 Hardware Config uration EB-471LF USER ′ S MANUAL Page: 2-19 2-24. SOUND CONNECTOR J1 : Sound Connector. The pin assignments are as follows: PIN ASSIGNMENT 1 MIC-IN 2 NC 3 GND 4 GND 5 LINE-L 6 LINE-R 7 GND 8 GND 9 SPK-L 10 SPK-R 2-25. TV-OUT CONNECTOR JTV1 : TV-Out Connector.
Chapter 2 Hardware Config uration Page: 2-20 EB-471LF USER ′ S MANUAL 2-26. LAN LED LED1 : LAN LED The pin assignments are as follows: PIN ASSIGNMENT 1+ ACTLEDJ 1- LILEDJ 2+ RJ45VCCA 2- SPLEDJ.
Page: 3-1 SOFTWARE UTILITIES This chapter comprises the detaile d inform ation of VGA driver, LAN driver, and Flash BIOS update . It also describes how to install the watchdog tim er configuration.
Chapter 3 Software Configuration Page:3-2 EB-471LF USER ′ S MANUAL 3-1. INTRODUCTION Enclosed with our EB-471LF package is our driver utility, which may comes in a form of a CD ROM disc or floppy diskettes.
Chapter 3 Software Configuration EB-471LF USER ′ S MANUAL Page:3-3 1. Win 9X program 2. Win NT4.0 program 3. Win 2000 program 4. Win XP program 3-2-1. Installation of VGA Driver: To install the VGA Driver, simp ly follow the following steps: 1. Place insert the Utility Disk into Floppy Disk Drive A/B or CD ROM drive.
Chapter 3 Software Configuration Page:3-4 EB-471LF USER ′ S MANUAL 3-3. FLASH BIOS UPDATE 3-3-1. System BIOS Update: Users of EB-471LF can use the program “Awdflash.
Chapter 3 Software Configuration EB-471LF USER ′ S MANUAL Page:3-5 FLASH MEMORY WRITER v7.XX (C) Award Software 2001 All Ri ghts Reserved Flash Type – SST 49LF004A /3.3V File Nam e to Program: H20bxxxx.bin Checksum: XXXXX Error Message : Are You Sure To Program (Y/N) Select " Y " , and the BIOS will be renewed.
Chapter 3 Software Configuration Page:3-6 EB-471LF USER ′ S MANUAL 3-4. LAN DRIVER UTILITY 3-4-1. Introduction EB-471LF is enhanced with LAN function t hat can support various network adapters. Installation program s for LAN drivers are lis ted as follows: 1.
Chapter 3 Software Configuration EB-471LF USER ′ S MANUAL Page:3-7 3-5. SOUND DRIVER UTILITY 3-5-1. Introduction The Realtek ALC202A sound function enhanced i n this system is fully compatible with Windows 98, Windows 98SE, Windows NT 4.0, Windows 2000, Windows ME and Windows XP.
Chapter 3 Software Configuration Page:3-8 EB-471LF USER ′ S MANUAL 3-6. INTEL® C HIPSET SOFTWARE INSTALLATION UTILITY 3-6-1. Introduction The Intel® Chipset Software Installatio n Utility installs to the target system the Windows* INF files that outline to the operating system how the chipset components will be confi gured.
Chapter 3 Software Configuration EB-471LF USER ′ S MANUAL Page:3-9 3-7. USB2.0 SOFTWARE INSTALLATION UTILITY 3-7-1. Installation of Utility for Windows 98SE/ 2000/XP Intel USB 2.0 Enhanced Host Controller dri ver can only be used on Windows 98SE, Windows 2000 and Windows XP on Intel Desktop boards.
Chapter 3 Software Configuration Page:3-10 EB-471LF USER ′ S MANUAL 3-8. WATCHDOG TIMER CONFIGURATION The I/O port address of the watchdog tim er is 2E(hex) and 2F(hex).
Chapter 3 Software Configuration EB-471LF USER ′ S MANUAL Page:3-11 Mov al, 07h ; Select Logical Device 8 of watchdog tim er Out dx,al Inc dx Mov al, 08h Out dx,al ;---------------------------------.
Page: 4-1 AWARD BIOS SETUP This chapter shows how to set up the Award BIOS. Section includes: z Introduction z Entering Setup z The Standard CMOS Features z The Advanced BIOS Features z The Advanced C.
Chapter 4 Award BIOS Setup Page: 4-2 EB-471LF USER ′ S MANUAL 4-1. INTRODUCTION This chapter will show you the function o f the BIOS in managing the features of your system . The EB-471LF Celeron® M Embedded CPU Card is equipped with the B IOS for system chipset from Award Software Inc.
Chapter 4 Award BIOS Setup EB-471LF USER ′ S MANUAL Page: 4-3 4-2. ENTERING SETUP When the system is powered on , the BIOS will enter th e Power-On Self Test (POST) routines and the following messag.
Chapter 4 Award BIOS Setup Page: 4-4 EB-471LF USER ′ S MANUAL 4-3. THE STANDARD CMOS FEATURES Highlight t he 〝 STANDARD CMOS FEATURES 〞 and press the <ENTER> key and the screen will d ispl.
Chapter 4 Award BIOS Setup EB-471LF USER ′ S MANUAL Page: 4-5 IDE Primary Master / Slav e: IDE Secondary Master / Slav e: The BIOS can automatically detect th e specificati ons and optimal operating mode of al most al l IDE hard drives.
Chapter 4 Award BIOS Setup Page: 4-6 EB-471LF USER ′ S MANUAL LBA (Logical Block Addressing): During drive accesses, the IDE controller transforms the dat a address described by sector, head and cylinder number into a physical block address, significantly i mproving data transfer rates.
Chapter 4 Award BIOS Setup EB-471LF USER ′ S MANUAL Page: 4-7 HARD DISK ATTRIBUTES: Type Cylinders Heads V-P comp LZone Sect Capacity 1 306 4 128 305 17 10 2 615 4 300 615 17 20 3 615 6 300 615 17 3.
Chapter 4 Award BIOS Setup Page: 4-8 EB-471LF USER ′ S MANUAL 4-4. THE ADVANCED BIOS FEATURES Choose the 〝 ADVANCED BIOS FEATURES 〞 in the main menu, the screen shown as below.
Chapter 4 Award BIOS Setup EB-471LF USER ′ S MANUAL Page: 4-9 FIRST/SECOND/ BOOT DEVICE: The BIOS attempt to load the operating system from the devices in the sequence selected in these items. BOOT UP NUMLOCK STATUS: Select power on state for Num Lock.
Chapter 4 Award BIOS Setup Page: 4-10 EB-471LF USER ′ S MANUAL 4-5. ADVANCED CHIPSET FEATURES Choose the 〝 ADVANCED CHIPSET FEATURES 〞 fro m th e mai n me nu , the screen shown as below.
Chapter 4 Award BIOS Setup EB-471LF USER ′ S MANUAL Page: 4-11 DRAM TIMING BY SELECTABLE: This allows you to select the DRAM timing. CAS LATENCY TIME: When synchronous DRAM i s installed, the num ber of clock cycles of CAS latency depends on the DR AM tim ing.
Chapter 4 Award BIOS Setup Page: 4-12 EB-471LF USER ′ S MANUAL MEMORY HOLE AT 15M-16M: You can reserve this area of system m emory for ISA adapter ROM. Wh en this area is reserved, it cannot be cached. The user information of peripherals that need to use thi s area of system m emory usually discusses their mem ory requirements.
Chapter 4 Award BIOS Setup EB-471LF USER ′ S MANUAL Page: 4-13 4-6. INTEGRATED PERIPHERALS Choose 〝 INTEGRATED PERIPHERALS 〞 f ro m th e mai n s et up men u, a display will be shown o n screen a.
Chapter 4 Award BIOS Setup Page: 4-14 EB-471LF USER ′ S MANUAL ONCHIP IDE DEVICE: The options for these item s are found in its sub menu. By pressing the <ENTER> key, you are prom pt to enter .
Chapter 4 Award BIOS Setup EB-471LF USER ′ S MANUAL Page: 4-15 hard drive and your system software both support Ultra DMA/33, select Auto to enable BIOS support. 4. OnChip Secondary PCI IDE Enable the secondary IDE channel. 5. IDE HDD Block Mode Block mode is also called block transfer, multiple commands, or multiple sector read/write.
Chapter 4 Award BIOS Setup Page: 4-16 EB-471LF USER ′ S MANUAL This item allows you to decide to active wh ether PCI Slot o r on-chip VGA first. SUPER IO DEVICE: The options for these item s are found in its sub menu.
Chapter 4 Award BIOS Setup EB-471LF USER ′ S MANUAL Page: 4-17 4-7. POWER MANAGEMENT SETUP Choose 〝 POWER MANAGEMENT SETUP 〞 option on the m ain menu, a display will be shown o n screen as below.
Chapter 4 Award BIOS Setup Page: 4-18 EB-471LF USER ′ S MANUAL 4-8. PNP/PCI CONFIGURATION Choose 〝 PNP/PCI CONFIGURATION 〞 fr om t he main men u, a d is pl ay will be shown on screen as below: P.
Chapter 4 Award BIOS Setup EB-471LF USER ′ S MANUAL Page: 4-19 RESOURCE CONTROLLED BY: The Award Plug and Play B ios can automat ically configure all of the booth and Plug and Play-co mpatible devices. Howev er, this capability means absolutely nothing unl ess you are using a Plug and Play operating system such as Windows 95.
Chapter 4 Award BIOS Setup Page: 4-20 EB-471LF USER ′ S MANUAL 4-9. PC HEALTH STATUS Choose 〝 PC HEALTH STATUS 〞 from the main menu, a display will be shown on screen as below: Phoenix - AwardBIOS CMOS Setup Utility PC Health Status Item Help Current Warning Temperature Current CPU Temperature Current SYSTEM Fan Speed Vcore Vccp 3.
Chapter 4 Award BIOS Setup EB-471LF USER ′ S MANUAL Page: 4-21 4-10. FREQUENCY CONTROL Choose 〝 FREQUENCY CONTROL 〞 fr om th e ma in men u, a d is pla y will be shown on screen as below: Phoenix.
Chapter 4 Award BIOS Setup Page: 4-22 EB-471LF USER ′ S MANUAL 4-11. LOAD FAIL-SAFE DEFAULTS By pressing the <ENTER> key on this item , you get a confirmation dialog box with a message si mila.
Chapter 4 Award BIOS Setup EB-471LF USER ′ S MANUAL Page: 4-23 4-13. SET SUPERVISOR PASSWORD/SET USER PASSWORD User is allowed to set eit her supervisor or user password, or both of them.
Chapter 4 Award BIOS Setup Page: 4-24 EB-471LF USER ′ S MANUAL 4-14. SAVE & EXIT SETUP After you have completed adjusting all the sett ings as required, you m ust remember to save these setting into the CMOS RAM.
Chapter 4 Award BIOS Setup EB-471LF USER ′ S MANUAL Page: 4-25 4-15. EXIT WITHOUT SAVING If you wish to cancel any changes you have m ade, you may select the “EXIT WITHOUT SAVING” and the orig inal setting stored in the CMOS will be retained.
Page: A-1 EXPANSION BUS This appendix indicates the pi n assignments. Section includes: z PC/104 Plus BUS Connector Pi n Assignment APPENDIX A.
Appendix A Expansion Bus Page: A-2 EB-471LF USER ′ S MANUAL PC/104 PLUS BUS CONNECTOR PIN ASSIGNMENT PC/104 Plus Bus connector is divided into four rows.
Page: B-1 TECHNICAL SUMMARY This section introduce you the m aps concisely. Section includes: z Block Diagram z Interrupt Map z RTC & CMOS RAM Map z Timer & DMA C hannels Map z I / O & Mem.
Appendix B Technical Summary Page: B-2 EB-471LF USER ′ S MANUAL BLOCK DIAGRAM.
Appendix B Technical Summary EB-471LF USER ′ S MANUAL Page: B-3 INTERRUPT MAP IRQ ASSIGNMENT 0 System TIMER 1 Keyboard 2 Cascade 3 Serial port 2 4 Serial port 1 5 Available 6 Floppy 7 Parallel port .
Appendix B Technical Summary Page: B-4 EB-471LF USER ′ S MANUAL RTC & CMOS RAM MAP CODE ASSIGNMENT 00 Seconds 01 Second alarm 02 Minutes 03 Minutes alarm 04 Hours 05 Hours alarm 06 Day of week 0.
Appendix B Technical Summary EB-471LF USER ′ S MANUAL Page: B-5 TIMER & DMA CHANNELS MAP Timer Channel Map : Timer Channel Assignment 0 System timer interrupt 1 DRAM Refresh request 2 Speaker to.
Appendix B Technical Summary Page: B-6 EB-471LF USER ′ S MANUAL I/O & MEMORY MAP Memory Map : MEMORY MAP ASSIGNMENT 0000000-009FFFF System memory used by DOS and application 00A0000-00BFFFF Display buffer memory for VGA/ EGA / CGA / MONOCHROME adapter 00C0000-00DFFFF Reserved for I/O device BIOS ROM or RAM buffer.
Een belangrijk punt na aankoop van elk apparaat Pro-Tech ULV Celeron M 3.5" Embedded Card With VGA/ SOUND/ LAN (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Pro-Tech ULV Celeron M 3.5" Embedded Card With VGA/ SOUND/ LAN heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Pro-Tech ULV Celeron M 3.5" Embedded Card With VGA/ SOUND/ LAN vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Pro-Tech ULV Celeron M 3.5" Embedded Card With VGA/ SOUND/ LAN leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Pro-Tech ULV Celeron M 3.5" Embedded Card With VGA/ SOUND/ LAN krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Pro-Tech ULV Celeron M 3.5" Embedded Card With VGA/ SOUND/ LAN bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Pro-Tech ULV Celeron M 3.5" Embedded Card With VGA/ SOUND/ LAN kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Pro-Tech ULV Celeron M 3.5" Embedded Card With VGA/ SOUND/ LAN . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
