Gebruiksaanwijzing /service van het product L114V251 van de fabrikant Lorex
Ga naar pagina of 54
Copyright © 2008 Lorex Technology In c. www.lorexcctv.com MODEL: L114V SERIES INSTRUCTION MANUAL English Version 2.0 DIGITAL VIDEO SURVEILLANCE RECORDER WITH MOTION DETECTION AND AUDIO RECORDING.
Thank you for purchasing the L114 Digital Video Surveillance Record er. Lorex is committed to providing our customers with a hi gh quality, reliable security product.
iii Important Saf eguards Important Safeguards In addition t o the careful atte ntion devoted to quality standards in the manufactur e process of your video product, safety is a major fa c tor in the design of every instrument. Howe ver, safety is your responsibility too.
iv Important Safeguards Service 13. Servicing - Do not attempt to service this video equipment yourself as openin g or removing covers may expose you to dangero us voltage or other hazards.
v General Precautio ns General Precautions 1. All warnings and instructions of t his manual should be followed. 2. Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use a water dampened cloth for cleaning. 3. Do not use this unit in humid or wet places.
vi Features Features • Simultaneous Recording and Playbac k • Up to 60 fps recording speed • Backup to USB flash drive • Adjustable screen position • Quad and single channel recording • NT.
vii Table of Contents Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Basic Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
viii F/W Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 Getting Started Getting Started The system comes with the following co mponents: INSTRUCTION MANUAL, QUICK START GUIDE, AND SOFTWARE CD 1 X POWER ADAPTOR 1 X POWER CABLE 1 X DVR 1 X REMOTE CONTROL HARD DRIVE SIZE, NUMBER OF CHANNEL S, AND C AMERA CONFIGURATION MAY VAR Y BY MODEL.
2 Basic Setup Basic Setup 1. Connect the Cameras a. Connect up to four BNC cameras to the BNC (female) ports on the rear panel of the system. 2. Connect the Monitor a. Connect the VGA cable from your monitor to the VGA port on the rear panel of the system.
3 Front Panel Front Panel 1. USB 2.0 port : Connect a USB flash drive for backup. 2. Up / CH 1 : In menus, move cursor up; du ring live viewing, view channel 1 in full-screen . 3. Down / CH 2 : In menus, move cursor do wn; duri ng live viewing, view channel 2 in full-screen.
4 Rear Panel Rear Panel 1. XGA : Port to connect a VGA (VGA or XVGA output) monitor (not includ ed). 2. Video Out : BNC (female) port to connect the system to a DVR or observation system. 3. Video In: BNC (female) inputs for cameras 1~4. 4. Audio In : RCA (female) port for audio recording (audio capab le cameras or microphone).
5 Remote Contro l Remote Control The remote control is the primary input method for navigating the user interface of the system. 1. CH 1~4 : During live viewing , press to view cameras 1~4 in single channel full-scre en; press 4 to return to quad split-scre en; during USB Backup, 1=Start Time , 2=End Time, 3=N/A, 4= Start backup .
6 Installing Cameras Installing Cameras Before you install the camera, carefully plan whe re and how it will be positioned, and where you will route the cable that connects the camera to t he DVR or observation system.
7 Installing Cameras Connecting BNC Cameras Use a BNC/Power extension cable (not included) to connect your BNC cameras to a monitor, Figure 5.0 Male and female ends of BNC/Power extension cable DVR, or observation system and power source. To connect the extension cable: 1.
8 Starting the System Starting the System To power the system On/Off: • Connect the power cable to the DC 12 V port on the rear panel of th e system Note: Make sure all cameras and cables are properly connected prior to po wering on the system. At startup, the system performs a basic system check and runs an in itial loading sequ ence.
9 Starting the System On-Screen Display The following makeup the on-screen display of the system: • Recording : Indicates active recording on e ach channel (manual and scheduled recording). • Motion : Indicates motion recording or motion detected on active ch annel.
10 Starting the System Auto Sequence Mode In Auto Sequence Mode, the system a utomatically switches between full-screen chan nels 1~4 in sequence. 2008/11/20 10:32:30 2008/11/20 10:32:30 AUTO CH4 CH3 CH1 AUTO AUTO 2008/11/20 10:32 :30 2008/11/20 10:32:30 CH2 AUTO Figure 6.
11 Logging in to the System Logging in to the System You must login to the system with a 6 -characte r password every time you access the system Setup Menu. ATTENTION : The default system password is 111111 Entering Your Password If your press the button on the front panel or on the remote control, th e password screen will appear.
12 Setting the Date and Time Setting the Date and Time It is highly recommended to immediately set the da te and time when first setting up your system. To set the date and t ime: 1. Click to open the Setup Menu. Login with your system password (by default, 1111 11) .
13 Recording Recording By default, the system is set to immediately re cord vid eo from connect ed cameras in continuous Time Record Mode. The system automatically records and saves events in 4-hour blo cks. Active recording is indicated by the red Record Icon in the top-right corner of e ach channel.
14 Playback Playback View recorded video on the system through playback mode. Figure 8.0 Playback display view 2008/11/20 10:32:30 CH1 To begin playback: 1. Press / . The Event List opens. For more details, see “Event List” on page 17. Figure 8.
15 Playback • : Press to pause playback; press again to resume playback • : Click to increase revers e playback speed (2X, 4X, 8X). • : Click to increase forwar d playback speed (2X, 4X, 8X).
16 Searching for Recorded Video Searching for Recorded Video You can search for recorded video on the syst em using Time Sear ch or the Event List. Time Search Use Time Search to manually select a time for the syste m to search for record video. To use Time Search : 1.
17 Searching for Recorded Video Event List You can also search for recorded vid eo data by using the Event L ist. Note: The Event List contains events which have occured over the last 4 ho urs.
18 Searching for Recorded Video To use the Event List: 1. Press / . The Event List opens. 2. Press to select a record event from the list (press to turn pages) a nd press / . Playback begins for the selected even t. Note: Please allow a few seconds for the event file to load.
19 Using the Setup Menu Using the Setup Menu The Setup menu allows you to configure vari ous settings on the system, including d ate/time, camera settings, and motion detection . To open the Setup menu: • Press . You must login with your system password (by default, 111111 ).
20 Using the Setup Menu Camera Configure settings for each camera and enable/disable display on the ma in display screen (covert display). Figure 11.0 Camera menu To configure camera settings: 1. From the Setup Menu, se lect Camera and press . The Camera menu ope ns.
21 Using the Setup Menu Record Set record speed, quality, record schedule and recording duration for triggered events. Figure 12.0 Record Menu To configure record settings: 1.
22 Using the Setup Menu Motion Detection Configure settings for motion sensitivity, motion grid, and the motion alarm for channels 1~4. Figure 13.0 Motion Detection Setu p menu To apply motion detection: 1. From the Setup Menu, select Motion Detection and press .
23 Using the Setup Menu Screen Use the Screen menu to set resolutions, turn the channel border on/off, adjust the ma in display position, and set the dwell time for Auto Sequence Mode.. Figure 14.0 Screen menu To configure screen settings: 1. From the Setup Menu, select Screen and press .
24 Using the Setup Menu System Use the Sytem menu to configure the intern al hard drive, change your password, set the date/time, view the event list, enable /disable the video loss alarm, and upgrade system firmware. Figure 16.0 System menu To configure system sett ings: • From the Setup Menu, select System and press .
25 Using the Setup Menu Password Change Use Hard Disk Setup to chan ge your system password (by default, 111111 ). Figure 16.2 Password Change screen To change your system password: 1. From the Hard Disk Setup menu, select Password Change and press .
26 Using the Setup Menu 2. Connect a USB flash drive to your PC. Copy the .FWI file to the connect USB flash drive. 3. Connect the USB flash drive to the USB port on the front panel of the system 4. Open the Setup menu. Login with your system password (by default 111111).
27 USB Backup USB Backup You can backup record ed video data from the system to a USB flash drive (not included). You can access USB Backup through direct Playback, or through Search and Event List in the system menus. Note: You must connect a USB flash drive to the USB port on the front pa nel in order to use USB Backup.
28 USB Backup Lorex Client Software The system comes with the L orex Client applicat ion that lets yo u playback video files you have saved to a USB flash drive (not included).
29 Using Lorex Client Using Lorex Client Prior to using Lorex Client, make sure you have copied video data from the system to a USB flash drive (not included). Launching Lorex Client To open DVR Viewer: 1. Insert the software CD included with you r system into your PC’s CD-ROM or DVD-R/RW drive.
30 Using Lorex Client 6. Still Capture & View mode buttons : Snapshot & View buttons include the following: • : Click to take a screenshot of the DVR Viewer display screen —copy the image to MS Paint, Photoshop or anothe r imaging application.
31 Using Lorex Client Sub-Menu The sub-menu lets you access several options. Figure 18.1 Lorex Client sub me nu To open the sub-menu: 1. Right-click anywhere on the main window to o pen the sub-menu. The sub-menu includes the following: • Open File : Select to open a .
32 Using Lorex Client Capture Use the capture feature to save a portion of video from the original VVF file. Figure 18.2 Capture sub menu To capture video: 1. Open Lorex Client. Open a saved video file. 2. During playback, select a p ortion of the video you want to save.
33 Using Lorex Client Exporting to AVI Lorex Client allows you export .VVF files to .AVI fo r increased flexibilty when playing back the video in third-party media players, such a s VLC™ and DivX Player™.
34 Using Lorex Client Options Use the Options window to configure general opt ions, on-screen display, and the default path for still capture. Figure 18.
35 Appendix 1: System Specificatio ns Appendix 1: System Specifications As our products are subject to con tinuous improvement, Lorex Technology Inc. and its subsidiaries reserve the right to modify product desig n, specifications, and prices without notice and without incurring any obligation .
36 Appendix 2: Full Connectivity Diagram Appendix 2: Full Connectivity Diagram The following diagram outlin es a general se t of connectio ns avai lable with the DVR. BNC CAMERAS LINE IN AUDIO / SPEAKERS (not included) VGA MONITOR (not included) DVR OBSERVATION SYSTEM, MONITOR, TV (not included) (to power adaptor) POWER Figure 19.
37 Appendix 3: Using Listen- in Audio Appendix 3: Using Listen-in Audio Listen-in audio allows you to listen to, and record live audio on the system. You can record one audio cha nnel (mono) with an RCA (male) audio cable.
38 Appendix 4: Replacin g the Hard Drive Appendix 4: Replacing the Hard Drive The system comes with a pre-installed 3 .5" SAT A hard drive, however the unit will work with a replacement single hard drive (up to 1 TB). Note: Make sure that the system is OFF and the power cable has been discon nected before changing the hard drive.
39 Appendix 4: Re placing the Hard Dr ive Replacing the Hard Drive To replace the hard drive: 1. Firmly connect the power and data cab les to the replacement SATA hard drive—each cable can only connect in one way. Figure 21.4 Connect the power and data cables.
40 Appendix 4: Re placing the Hard Dr ive Formatting the Hard Drive Use Hard Disk Setup in the System me nu to format the internal hard drive. Note: You must stop recording before attempting t o format the hard drive. ATTENTION : Formatting erases all recorded video data on the hard drive.
41 Appendix 5: Compression C odecs Appendix 5: Compression Codecs When exporting a .VVf file to .AVI, you can choos e any of the following codecs fo r compression: • Cinepak Codec by Radius • Intel 4:2:0 Video V2.50 • Intel Indeo(R) Video R3.2 • Intel IYUV Codec • Microsoft RLE • Microsoft Video 1 • Microsoft H.
42 Troubleshooting Troubleshooting When a malfunction occurs, it may not be seri ous and can b e corrected easily. The following describes the most common problems and solutions.
43 Troubleshootin g (cont’d.) Troubleshooting (cont’d.) Error Possible Causes Solutions • There is no pictu re on selected channels / camera picture is not being disp layed • Camera cables a r.
LOREX PRODUCT LIMITED WARRANTY Lorex warrants, to the original retail purch aser only (the “Purchaser”) , that this item ( the “Product”) if prop erly used and installed, and where applicable,.
Lorex no hace ni nguna de cada decl aración ni garan tía de ningun a clase con resp ecto al potencial, capacidad o eficacia del Pro ducto para evit ar, minimiz ar o en alguna form a afectar a los daños o lesion es personales o a la propiedad.
It’s all on the Web! Tout est sur le Web! ¡Todo está en la Web! Lorex Technology Inc. www.lorexcctv.com www.lorexcctv.com Product Information Information sur le produit Información acerca del pro.
Een belangrijk punt na aankoop van elk apparaat Lorex L114V251 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Lorex L114V251 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Lorex L114V251 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Lorex L114V251 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Lorex L114V251 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Lorex L114V251 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Lorex L114V251 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Lorex L114V251 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
