Gebruiksaanwijzing /service van het product FD-1008AT van de fabrikant Fujitsu
Ga naar pagina of 44
SERVIS 8-port KVM Switch Integrated Console Drawer [FD-1008AT] 16-port KVM Switch Integrated Console Drawer [FD-1016AT] User’s Manual.
I Declaration of Conformity Model Number : FD-1000 ATseries Trade Name : Console Drawer Responsible party : FUJITSU COMPONENT AMERICA, INC. Address : 250 East Caribbean Drive, Sunnyvale,CA94089 Telephone number : (408) 745-4900 This device complies with Part 15 of the FCC Rules.
II.
1 Contents PREFACE ...................................................................................................................................................... 2 Conventions ...................................................................
2 Preface Congratulations on your purchase of a se rver rack-mountable KVM Switch Integrated Console Drawer. Using this product will greatly improve the efficiency and server switching functionality of the workspace around your racks. Space that was used in previous layouts can now be used more freely due to our com pact sliding module design.
3 Please note the safety information in [Important Notices]. 1. Check the package delivered and whether the Console Drawer has been damaged when unpacking. 2. Remove the rubber stabilizer from the front left side of the Console Drawer. The rubber stabilizer is inserted to prev ent the Console Drawer from sliding when installing or moving it.
4 Import ant Notices This chapter contains cautions that must be taken when operati ng the Console Drawer and information related to safety. Carefully r ead this chapter to use the Console Drawer correctly.
5 ● Only licensed personal can uncouple, remove or switch parts (such as electro-magnetic wave devices) which bear a warning mark (such as a lightening bolt). ● Only the resolution and refresh rate specif ied in the monitor explanation in [Technical Specifications] can be used as incorrect settings may damage the monitor.
6 ● When using a mouse with a scr oll function such as a mouse with PS/2 wheel, scrolling outside of the support sometimes does not f unction properly. Also, the scroll mice may fail to function properly depending on the software used. ● The keyboard and mouse connectors are the sa me shape.
7 Inst allation Please note the safety information in [Important Notices]. Maintain the area around the equi pment when using the Console Drawer (See [Technical Specificati ons] for more information). Avoid dust, humidity and extreme temperatur es. Installation may re-quire more than two people in some situat ions.
8 Installing tapped guide rails diagram.
9 Installing Console Drawer Be careful that the latch lever ( see page 17) does not come loose. If the latch lever becomes loose, t he Console Drawer may slide open. When installing the Console Drawer on the guide rails, make sure that at least two personnel are ho lding the Console Drawer.
10 Names and Functions of Part s ● Overview ● Console switches The five buttons and two LEDs on the monitor are explained in order from left to right. Power button: Push this button to turn on t he power to the monitor. Also, pushing this button while the monitor is on cu ts the power to the monitor.
11 ● Rear Panel 8-Port KWM Switch ( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 ) ( 7 ) 8-port KVM Switch rear panel (1) Power cable connector Connect to a 100 V AC electric outlet. (2) Connectors for servers [1 through 8] Connect each port (1 through 8) on this dev ice to the relevant host’s keyboard, mouse and monitor connectors with the special cable.
12 DIP Switch Settings The factory default settings are as follows: 1 2 3 4 5 6 7 8 ON OFF (*Note: the indicates the switch position) DIP Switch Functions SW No.
13 Connecting and Removing Cables Read the Console Drawer manual before connecting the cables. Do not connect or remove the cabl es during a thunderstorm. When unplugging cables hold them by the plug, not the cable. Connect and remove cables in the following order.
14 5. In the case of a cascaded connection (w hen KVM Switch is connected in a two-level connection) By using cascaded connections (maximum 1 mast er and 8 slaves) it is possible to hook up a maximum of 64 servers.
15 Removing Cables Unplug the power cords, from the power outlets, of all t he equipment that are effected, then remove each cable..
16 Operation Pull the Console Drawer toward sl owly until the slide rails lock. If they do not lock, the weight of t he Console Drawer may cause it to move. Be careful not to pinch your hand when doing such activities as pulling or pushing the slide modul e and opening and closing the LCD.
17 Open the monitor completely. Opening the LCD diagram.
18 Adjusting the Monitor The five buttons and two LEDs on the monitor are explained in order from left to right. Power button: Push this button to turn on t he power to the monitor. Also, pushing this button while the monitor is on cu ts the power to the monitor.
19 Basic Adjustment Procedure 1. Push the menu button to open the menu. Example of menu screen display 2. Select the item to be adjusted with the ▼ button and the ▲ button. 3. Switch to the various adjustm ent screens with the button. 4. Change setting values with the ▼ button and the ▲ button.
20 Symbol Displayed term Adjustment details Brightness Adjust the brightness. Contrast Adjust the contrast. H.Position Adjust the horiz ontal position of the image. V.Position Adjust the vert ical position of the image. Phase Adjust the phase (eliminate screen noise).
21 Resolution and Refresh Rate Mode Resolution Horizontal frequen cy (KHz) Vertical frequency (Hz) 31.47 60.0 37.86 72.0 600 × 480 37.5 75.0 37.9 60.0 48.
22 Hot-Key SW operations To display the OSD menu for switching the server, press in and release this switch. Keyboard Operation, LED I ndicators and the Reset SW Num Lock LED : Num Lock enabled (LED O.
23 Pointing Device Operation Lightly touch or tap t he operation surface to oper ate the pointing device. Moving the pointer: Just lightly touch the operation surface in the direction you want to move the cursor. Single click: Lightly tap the operation su rface once, or click the left button once.
24 Switching the Server A server can be selected from the OSD menu (Hot Key Mode) . When a currently selected server is turned OFF, that state will be maintai ned. In this case, switch the desired server in the Hot Key Mode. Keyboard/mouse operations are enabled only on the server currently connected to the selected port.
25 1) OSD in a non-cascaded connection (Hot Key Mode A) (Different from actual server name display) 2) OSD screen in a cascaded connection (Hot Key Mode A) Example OSD Screen with cascaded channel selected [Screen Details] 1. Numbers 1 to 8 and function keys F1 to F8 (for a cascaded connection) indicate the server connected ports.
26 3) Changing the master/slave display w hen there is a cascaded connection (Hot Key Mode A) Cascade-connected master channel selected Slave channel selected [Screen Details] 1.
27 How to switch the se rver on the OSD screen Switching in Hot Key Mode A The following OSD screen is displayed if you enter Hot Key Mode A after pressing the Hot-Key SW, <Ctrl>+<Alt>+<Shift> keys at the same time, and pressing the <Scroll Lock> key twice.
28 b. [Direct Switching Via Keyboard] 8-port KVM Switch 1) Use the number keys <1>~<8>. For a ca scaded setup, first use the number keys <1>~<8> to select a master-side channel, then use the function keys <F1>~<F8> to select a slave-side port.
29 Switching in Hot Key Mode B The OSD menu is displayed at the top left of the screen when the <Ctrl> key is pressed twice and Hot Key Mode B is entered. (Press the <Ctrl> key quickly in succession.) When the text background is displayed in r ed, the screen is switched by pressing the key of the desired server number.
30 <Enter> key: Console switches to the currently displayed screen <Esc> key: Console reverts to the server active before Auto Scan Mode was entered Setting/Changing Server Names Changing a master-side name Changing a slave-side name (Single KVM setup has no blue area) [Screen Details] 1.
31 Constant Server Name Display Function When the device is operating in normal Cons ole Mode, holding the <Shift> key down and pressing the <Scroll Lock> key twice causes the server name for the currently selected channel to be shown in the top-left of the screen.
32 EDID Setting Mode After pressing the Hot-Key SW, the <Ctrl>+< Alt>+<Shift> keys or d ouble pres sing the <Scroll Lock> to activate the Hot Key Mode, pressing the <N> key causes the display to switch to the Customer Mode A: The top line accesses the EDID Setting Mode.
33 The EDID Setting Mode may be ended as follows: Press the <P> key to return to the Server Selection screen. Press the <Esc> key to escape the Hot Ke y Mode and return to the normal console screen. EDID for 15" LCDs (Console Drawer) is set before the C onsole Drawer is shipped from the factory.
34 Inserting the slide module diagram Cleaning Console Drawer Turn off the power and unplug the power cable from the power socket. Do not use cleansers that contain abr asives; or such organic solvents as benzene or thinner; or disinfect ant alcohol. Do not apply water and cleanser or spray type cleaners dire ctly to the Console Drawer.
35 T echnical Specifications Item Specification Product ID (KVM Switch Integrated Console Drawer) FD-1008AT FD-1016AT Number of Connected Servers Max. 8 (more if connections are cascaded) Max.
36 Item Specification Product ID FD-1008AT FD-1016AT Current Supply to Keyboard/Mouse Max. 300mA Max. 150mA Voltage AC100 − 240V 50/60Hz Power consumption 0.
37 T roubleshooting Symptom Cause Action The AC cord is not connected to the electric outlet or to the switch device. Connect the AC cord. The AC power is off. Turn on the AC power. POWER button was turned OFF. Power lamp (green) is out. Turn POWER button ON.
38 Symptom Cause Action Cascaded connections are not recognized. A problem has occurred at the switcher. Press the reset switch. (Both the slave and the master) The OSD display flashes at 5-second cycles. No image (H/V Sync) signal from server (suspended state) Input image (H/V Sync) signal.
39 Note.
KVM Switch Integrated Co nsole Draw er [F D-10XXAT Series] User’s Manual Published Nov 2003 Published by FUJIT SU COMPONENT LIMITED Printed in Japan ● The contents of this manual may be modifi ed for improvements without prior notice.
This manual is made of recycled paper. 031222 NC14004 -L525 01.
Een belangrijk punt na aankoop van elk apparaat Fujitsu FD-1008AT (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Fujitsu FD-1008AT heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Fujitsu FD-1008AT vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Fujitsu FD-1008AT leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Fujitsu FD-1008AT krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Fujitsu FD-1008AT bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Fujitsu FD-1008AT kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Fujitsu FD-1008AT . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
