

SI 18.896 SI 18.895 SI 18.890 SI 18.830 SI 18.720


shot 120g/min

00 800 27 28 64 63 00 800 BRAUNINFOLINE
08 44 - 88 40 10
0800 783 70 10
1 800 509 448
0 810 309 780
0 800 14 592
901 11 61 84
808 20 00 33
(02) 6 67 86 23
0 800-445 53 88
70 15 00 13
22 63 00 93
PL
0 801 127 286 0 801 1 BRAUN
CZ
TR
0 212 473 75 85
8 800 200 20 20
+38 044 428 65 05
HK
852-25249377 (Audio Supplies Company Ltd.)
Braun GmbH Frankfurter Straße 145 61476 Kronberg / Germany


SI 18.895 / SI 18.896
hot 120g/min


ision shot
hot 120g/min



Our products are engineered to meet the highest standards of quality, functionality and design. We hope you enjoy your new Braun steam iron.
7 Temperature selector 8 Temperature pilot light 9 «auto-off» light (only with SI 18895 and
SI 18896 models) 10 Heel rest 11 Textile Protector Plus (only with SI 18896, SI 18895 and SI 18890 models) 12 Soft Textile Protector (only with SI 18896 model)
C Ironing Vario steam You can select the steam quantity by turning the steam regulator (6) in a range from «0» to «6». The temperature selector (7) has to be set within the red range. We recommend a medium steam setting for all normal ironing. Only when ironing linen, thick cotton or similar fabrics we recommend the maximum steam setting. Notice: While ironing, do not turn the steam regulator beyond setting «6».
Vario plus steam For extra steam, press the steam regulator (6) for max. 30 seconds. The temperature selector (7) has to be set within the solid red range.
Precision shot Prior to use, press the precision shot button (4) 3 to 4 times to activate it. Press the precision shot button in inter- vals of at least 5 seconds for a powerful steam shot with preconditioning steam. Precision shot can be activated when dry ironing. However, the temperature selector has to be within the solid red range. The precision shot function can also be used in the vertical position for steaming hanging clothes.
A Description 1 Preconditioning nozzles 2 Spray nozzle 3 Water tank opening 4 Precision shot button 5 Spray button 6 Steam regulator
Important Safeguards ·

With the Soft Textile Protector attached, you can iron all ironable fabrics without an intermediate cloth. The Soft Textile Protector is perfectly suited for touching up e.g. creases of delicate business suits without having to use an ironing cloth.
Spray function Press the spray button (5).
Dry ironing Set the steam regulator (6) on position «0» (= steam off).
With the Soft Textile Protector, you are able to iron delicate fabrics with the temperature setting within the solid red range so that you can use all steam functions your iron offers. However, in order not to damage the SoftTouch cushion, avoid ironing over e.g. zippers, metal buttons/rivets or strass with the Soft Textile Protector attached.
The «auto-off» mechanism causes a slight rattling noise during ironing. This is normal and in no case indicates a fault of the iron. The red «auto-off» light (9) will flash when the automatic shut-off is activated. This happens when the iron has rested – horizontally on its sole plate for about 30 seconds or – vertically on its heel rest for about 8 minutes.
(* in order to know whether a piece of garment is ironable, please refer to its care label.)
Unplug the iron and turn the steam regulator to position «0». To prolong the life of the iron, empty the water tank. Store the cool iron in a dry place always standing on its heel rest.
To turn on the iron again, just move it. When the «auto-off» pilot light stops flashing, the electrical power is on again. The automatic shut-off will be activated approximately 2 minutes after the iron is plugged into a socket.
To clean the sole plate, use steel wool. Never use a scouring pad, vinegar or other chemicals. To clean the soft material on the handle, use soapy water.
E Textile Protectors Textile Protector Plus (11) (only with SI 18 896, SI 18 895 and SI 18 890 models) The Textile Protector Plus protects delicate fabrics from heat damage so that you can iron most fabrics without an intermediate cloth. A special coating avoids shiny patches. With the Textile Protector, you are able to iron delicate fabrics with the temperature setting within the solid red range so that you can use all steam functions your iron offers. To check the reaction of your fabrics before you start ironing, we recommend that you iron a small section of material on the reverse side. However, in order not to damage the coating, avoid ironing over e.g. zippers, metal buttons/rivets or strass with the Textile Protector Plus attached. After having attached the Textile Protector, wait about 1 1/2 minutes before you start ironing.
The anticalc valve located on the lower end of the steam regulator has to be decalcified regularly (e.g. whenever steam development is insufficient). For this, the water tank has to be empty.
Removing the steam regulator with the anticalc valve Turn the steam regulator clockwise towards the steam setting «6». Keep on turning firmly beyond the resistance until the steam regulator is lifted. When positioned at x, pull it out vertically. Do not touch the anticalc valve at its lower end. Immerse the anticalc valve in vinegar (not vinegar essence) or lemon juice for a minimum of 30 minutes. Brush off remaining residues and rinse under running water (fig. H, 1-7).
Soft Textile Protector (12) (only with SI 18 896 model) The Soft Textile Protector ensures an increased heat protection and utmost care for most delicate fabrics thanks to its specially designed SoftTouch cushion. Even most delicate, ironable* fabrics are protected against heat damage and shiny patches are avoided.
Re-inserting the steam regulator When re-inserting the steam regulator, make sure the steam regulator base still points on setting x (fig. H, 8). Firmly push down the steam regulator until it turns back to setting «6» (fig. H) where it catches.

Guarantee We grant 2 years guarantee on the product commencing on the date of purchase. Within the guarantee period we will eliminate, free of charge, any defects in the appliance resulting from faults in materials or workmanship, either by repairing or replacing the complete appliance as we may choose. This guarantee extends to every country where this appliance is supplied by Braun or its appointed distributor.
In order to clean the steam chamber from residues, decalcify it as shown in picture section I, 1-8. Caution: Hot water and steam will come out from the sole plate when the steam regulator is turned clockwise beyond setting «6». Wait for the sole plate to cool down, then clean it as described above. Then refill the tank with water, heat up the iron and press the precision shot button 4 times to rinse the iron before ironing (fig. I, 9-13). Do not use commercial decalcifiers, they may damage the iron.
This guarantee does not cover: damage due to improper use, normal wear or use as well as defects that have a negligible effect on the value or operation of the appliance. The guarantee becomes void if repairs are undertaken by unauthorised persons and if original Braun parts are not used.
To obtain service within the guarantee period, hand in or send the complete appliance with your sales receipt to an authorised Braun Customer Service Centre.

Turn the steam regulator anti-clock- wise to reduce the steam or turn it off. Take longer intervals when pressing the precision shot button. Select a higher temperature setting.
For UK only: This guarantee in no way affects your rights under statutory law.
Subject to change without notice.
This product conforms to the European Directives EMC 2004/108/EC and Low Voltage 2006/95/EC.
Please do not dispose of the product in the household waste at the end of its useful life. Disposal can take place at a Braun Service Centre or at appropriate collection points provided in your country.
Problem Remedy
Pagina's waarnaar wordt verwezen in deze handleiding — fabrikant, ondersteuning en downloads.
Eigenaren en ons team reageren doorgaans binnen een dag — en uw vraag helpt ook de volgende persoon.
Stel als eerste een vraag — andere eigenaren of ons team geven antwoord.