NL
Ferm logo
Officiële handleiding

Ferm SSM1007

92 pagina's·9.9 MB·Zaagmachine·PDF·ENJA
Ferm SSM1007
Inhoudsopgave 20 secties Fig. D · Fig. E-1 · Fig. E-2 · Fig. F-1 · … TonenVerbergen
Page 1 of the Ferm SSM1007 user manual
Pagina 1 · klik om te vergroten
Pagina 1
Ferm SSM1007 diagram (page 1)
Afb. 1
Page 2 of the Ferm SSM1007 user manual
Pagina 2 · klik om te vergroten
Pagina 2
Ferm SSM1007 diagram (page 2)
Afb. 2
Page 3 of the Ferm SSM1007 user manual — Fig. F-2
Pagina 3 · klik om te vergroten
Pagina 3
Ferm SSM1007 — Fig. D diagram (page 3)
Afb. 3 · Fig. D

Fig. D

Ferm SSM1007 — Fig. D diagram (page 3)
Afb. 4 · Fig. D
Ferm SSM1007 — Fig. D diagram (page 3)
Afb. 5 · Fig. D

Fig. E-1

Fig. E-2

Ferm SSM1007 — Fig. E-1 diagram (page 3)
Afb. 6 · Fig. E-1

Fig. F-1

Ferm SSM1007 — Fig. F-1 diagram (page 3)
Afb. 7 · Fig. F-1

Fig. F-2

Page 4 of the Ferm SSM1007 user manual — Fig. H-1
Pagina 4 · klik om te vergroten
Pagina 4
Ferm SSM1007 — Fig. G-1 Fig. G-2 diagram (page 4)
Afb. 8 · Fig. G-1 Fig. G-2
Ferm SSM1007 — Fig. G-1 Fig. G-2 diagram (page 4)
Afb. 9 · Fig. G-1 Fig. G-2

Fig. G-1 Fig. G-2

Ferm SSM1007 — Fig. G-1 Fig. G-2 diagram (page 4)
Afb. 10 · Fig. G-1 Fig. G-2

Fig. H-1

Fig. H-2

Ferm SSM1007 — Fig. H-1 diagram (page 4)
Afb. 11 · Fig. H-1
Page 5 of the Ferm SSM1007 user manual — 2. MACHINE INFORMATION
Pagina 5 · klik om te vergroten
Pagina 5

SCROLL SAW SSM1007

  • Check wooden work pieces for possible protruding nails etc. and remove these.
  • Do not touch the sawing surface with your hands.
  • Never leave the sawing machine unattended while it is running.
  • Do not remove any wood debris etc, in the vicinity of the saw with your hands while it is running. Turn the machine off before removing the wood debris.

Thank you for buying this Ferm product. By doing so you now have an excellent product, delivered by one of Europe’s leading suppliers. All products delivered to you by Ferm are manufactured according to the highest standards of performance and safety. As part of our philosophy we also provide an excellent customer service, backed by our comprehensive warranty. We hope you will enjoy using this product for many years to come.

  • Immediately switch off the machine when
  • Interruption in the mains plug, mains lead or mains lead damage.
  • Defect switch.
  • Smoke or stench of scorched isolation.

1. SAFETY INSTRUCTIONS

Explanation of the symbols

Electrical safety When using electric machines always observe the safety regulations applicable in your country to reduce the risk of fire, electric shock and personal injury. Read the following safety instructions and also the enclosed safety instructions.

Read the operating instructions carefully before using this device. Familiarise yourself with its functions and basic operation. Service the device as per the instructions to ensure that it always functions properly. The operating instructions and the accompanying documentation must be kept in the vicinity of the device.

Always check that the power supply corre sponds to the voltage on the rating plate.

Mains connection Only use earthed sockets with earthing wire connected per the regulations.

Denotes risk of personal injury, loss of life or damage to the tool in case of non observance of the instructions in this manual.

Using extension cables Only use an approved extension cable, corre sponding to the machine power use. The wires must have a minimum cross section of 1.5 mm2. If the cable is on a reel, it must be fully laid out.

Denotes risk of electric shock.

Wear ear and eye protection.

2. MACHINE INFORMATION

  • Specific safety instructions
  • Wear safety goggles and a dust mask.
  • This scroll saw machine is for indoor use only.
  • Ensure that the teeth of the saw point downwards prior to using the machine.
  • If teeth of the saw blade are missing or are damaged, then the saw blade must be replaced immediately.
  • Use the scroll saw machine on a stable and flat surface.
  • Never exert pressure on the sides of the saw blade because it may break.

Intended use This scroll saw is great for making toys, puzzles, games, fretwork and jewelry. Because of its cutting capacity it is a handy do-it-yourself tool. It cuts wood up to 50 mm thick as well as plastics and non-ferrous metals.

Voltage 230 V ~

Power input 120 W

Technical specifications · Frequency 50 Hz

Page 6 of the Ferm SSM1007 user manual — 3. ASSEMBLY
Pagina 6 · klik om te vergroten
Pagina 6

No-load speed 400 - 1600 min-1

  • Installing the protective cover Fig. C Before commissioning the machine, the protective cover (5) must be installed.
  • Mount the protective cover on the metal part as shown on Fig. C
  • Insert the screw as shown on Fig. C
  • Screw the nut tightly.

Max. Cutting depth at 90° 50mm

Max. Cutting depth at 45° 23mm

Max. Cutting length/working depth 406mm

Weight 10.4kg

Sound pressure (LPA) 78 dB(A) K=3dB

Acoustic power (LWA) 91 dB(A) K=3dB

4. OPERATION

Description The numbers in the following text refer to the pictures on page 2 - 4.

Always observe the safety instructions and obey the relevant regulations.

Switching on/off Fig. A1 Place the machine onto a flat and solid surface. Place the Foot pedal switch (10) on the ground. The machine can be switched on/off when the pedal is actuated. A foot pedal switch for switching on/off is practical, especially for internal cuttings, since your hands are kept free and you can fully concentrate on the work piece under the scroll saw. The foot pedal switch cannot influence the speed (see below Speed Adjustment).

Fig. A 1. On/off switch 2. Angle adjustment knob 3. Speed adjustment knob 4. Saw blade holder 5. Protective cover 6. Spanner 7. Dust blow pipe 8. Workpiece holder 9. Table inlay 10. Foot pedal switch 11. Connection vacuum cleaner 12. Locking knob 13. Operation switch

Beware of unintentional actuation of the foot pedal switch.

Caution! Always choose the preferred operation mode with the Operation switch (13) before using the machine. The machine will not start in ‘O’ mode.

3. ASSEMBLY

Before assembly, always switch off the machine and remove the mains plug from the mains.

  • Continuous operating mode
  • Use the Operation switch (13) to choose for ‘I’ continuous operation.
  • Connect the scroll saw to the mains.
  • Start the machine by pushing the green ONswitch (1).

Install of a stationary machine Fig. B This machine is a stationary machine and for safety reasons we recommend the machine to be firmly installed and not used for mobile applications.

Push the red OFF-switch (1) to turn the machine off.

The machine can be mounted to a workbench as shown on Fig. B. The machine must be mounted on the same 4 points that the rubber feet are assembled. Each of the 4 points must be secured with a bolt, washer and nut. The necessary tools and small parts for assembling the saw on a workbench are not supplied with the saw.

  • Foot pedal operating mode
  • Use the Operation switch (13) to choose for ‘II’ foot pedal operation.
  • Connect the scroll saw to the mains.
  • Push the green ON-switch (1).
  • Start the machine by pushing the Foot pedal switch (10) with your foot.

Blade length 125mm

Page 7 of the Ferm SSM1007 user manual — 4. OPERATION
Pagina 7 · klik om te vergroten
Pagina 7

To stop the machine, release the Foot pedal switch (10). Push the red OFF-switch (1) to turn the machine off.

  • Push the saw blade through the slot, with the teeth pointing downwards. Make sure that the bolt of the saw blade (or saw-blade adapter) slides into the lower saw blade holder.
  • Pull the saw blade up, so that the upper bolt (or saw-blade adapter) slides into the upper holder.
  • Push the Table inlay (9) downwards into the saw table.
  • Retighten the Spanner (6) by turning it anticlockwise until the saw blade has the required tension.
  • Remove all tools and other objects from the saw table. Activate the current and allow the saw blade to run before starting to saw. The saw blade should run quietly.
  • Tilting the table Fig. A, D The scroll saw table can be tilted from 0 to 45°. To do so:
  • Untighten the Angle adjustment knob (2) by turning it anti-clockwise.
  • Manually tilt the table until the desired angle has been reached (see the graduated scale on the machine).
  • Retighten the Angle adjustment knob (2) by turning it clockwise.

Removing the saw blade Fig. E

Adjusting the saw blade position Fig. F The saw blade can be mounted in two different positions: regular frontal position as shown on Fig. F1 and in sideways position as shown on Fig. F2. When using the sideways position, even longer workpieces ca be sawed with ease.

Always disconnect the machine from the main power supply before carrying out any maintenance work.

  • Untighten the Spanner (6) by turning it clockwise until the spring is slack.
  • Pull the Table inlay (9) upwards out of the saw table to achieve a clear view of the blade, as shown on fig. E1.
  • Carefully push down the upper saw-blade holder and slightly lift the blade in order to facilitate its removal, as shown on fig. E2.
  • Allow the blade to drop down slightly and push it forward, in order to loosen it from the lower holder.
  • Adapters for universal saw blades Fig. G The enclosed adapters should only be used with universal (= without pins on the end) saw blades
  • Unscrew the Allen screws on the adapter anticlockwise as shown on fig. G1
  • Slide the universal saw into the gap between the Allen screws
  • Tighten the Allen screws clockwise so the saw is clamped
  • Install the saw blade (see INSTALLING THE SAW BLADE) on the saw blade holders as shown on fig. G2

Installing the saw blade Fig. E

Always disconnect the machine from the main power supply before carrying out any maintenance work.

  • Workpiece holder Fig. A, H The workpiece holder (8) is used to hold the workpiece to the saw table, preventing the workpiece from moving up and down due to the movement of the blade. The workpiece holder must be adjusted in height depending on the thickness of the workpiece.
  • Untighten the Locking knob (12) by turning it anti-clockwise.
  • Adjust the height of the Workpiece holder (8) to the desired height.

Use universal saw blades from any better DIY shop or machine shop.

  • Select the correct blade for the kind of wood to be cut.
  • Untighten the Spanner (6) by turning it clockwise until the spring is slack.
  • Pull the Table inlay (9) upwards out of the saw table to achieve a clear view of the blade, as shown on fig. E1.
Page 8 of the Ferm SSM1007 user manual — WARRANTY
Pagina 8 · klik om te vergroten
Pagina 8
Ferm SSM1007 — WARRANTY diagram (page 8)
Afb. 12
  • Retighten the Locking knob (12) by turning it clockwise.

Faulty and/or discarded electrical or electronic apparatus have to be collected at the appropriate recycling locations.

  • Speed Adjustment Fig. A The required speed can be adjusted by using the Speed adjustment knob (3). Also during running the rotational speed can be adjusted.
  • To increase the speed, turn the Speed adjustment knob (3) clockwise.
  • To decrease the speed, turn the Speed adjustment knob (3) anti-clockwise. The required speeds depends on the material and can be determined by practical testing.

Only for EC countries Do not dispose of power tools into domestic waste. According to the European Guideline 2012/19/EU for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally friendly way.

Sawdust blower Fig. A The sawdust blower keeps the workpiece clean for more accurate scroll cuts. For best results, always direct air flow from the dust blow pipe at the blade and workpiece. To adjust, simply bend to desired position.

The product and the user manual are subject to change. Specifications can be changed without further notice.

WARRANTY

Read the warranty conditions on the separately supplied warranty card.

5. MAINTENANCE Always disconnect the machine from the main power supply before carrying out any maintenance work.

The machine is designed to function faultlessly for a long period and with a minimum of maintenance. Extend its lifespan by regularly cleaning the machine and treating it correctly.

Cleaning Regularly clean the machine with a soft cloth, preferably after each use. Keep the ventilator slot free of dust and other deposits. Remove any tenacious deposits with a soft cloth moistened with soap. Do not use solvents (petrol, alcohol, ammonia, etc.) as they will damage the plastic parts.

Replacing the mains connection cable The mains connection cable may only be replaced by a special cable in a specialised workshop.

Replacing cables or plugs Dispose of old cables or plugs immediately after replacing them. It is dangerous to connect the plug of a loose cable to a wall socket.

Page 9 of the Ferm SSM1007 user manual — Spare parts list
Pagina 9 · klik om te vergroten
Pagina 9

Spare parts list

SSM1007

Ferm SSM1007 — Spare parts list diagram (page 9)
Afb. 13 · Spare parts list
Page 10 of the Ferm SSM1007 user manual — Spare parts list
Pagina 10 · klik om te vergroten
Pagina 10
Page 10 of the Ferm SSM1007 user manual — Spare parts list
Page 11 of the Ferm SSM1007 user manual — EN61029-1, EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3
Pagina 11 · klik om te vergroten
Pagina 11

DECLARATION OF CONFORMITY SSM1007 - SCROLL SAW MACHINE

(EN) We declare under our sole responsibility that this product is in conformity with directive

(SL) S polno odgovornostjo izjavljamo, da je ta izdelek v skladu in da odgovarja naslednjim

2011/65/EU of the European parliament and of the council of 8 June on the restriction of the use of certain hazardous substances in electrical and electronic equipment is in conformity and accordance with the following standards and regulations: (DE) Der Hersteller erklärt eigenverantwortlich, dass dieses Produkt der Direktive 2011/65/

standardom terpredpisom: je v skladu z direktivo 2011/65/EU Evropskega parlamenta in Sveta z dne 8. junij 2011 o omejevanju uporabe določenih nevarnih snovi v električni in elektronski opremi. (PL) Deklarujemy na własną odpowiedzialność, że ten produkt spełnia wymogi zawarte w

EU des Europäischen Parlaments und des Rats vom 8. Juni 2011 über die Einschränkung der Anwendung von bestimmten gefährlichen Stoffen in elektrischen und elektronischen Geräten entspricht. den folgenden Standards und Vorschriften entspricht: (NL) Wij verklaren onder onze volledige verantwoordelijkheid dat dit product voldoet aan de

następujących normach i przepisach: jest zgodny z Dyrektywą 2011/65/UE Parla- mentu Europejskiego i Rady z dnia 8 czerwca 2011 r. w sprawie ograniczenia stoso- wania niektórych niebezpiecznych substancji w sprzęcie elektrycznym i elektronic- znym. (LT) Prisiimdami visą atsakomybę deklaruojame, kad šis gaminys atitinka žemiau

conform Richtlijn 2011/65/EU van het Europees Parlement en de Raad van 8 juni 2011 betreffende beperking van het gebruik van bepaalde gevaarlijke stoffen in elektrische en elektronische apparatuur en in overeenstemming is met de volgende standaarden en reguleringen: (FR) Nous déclarons sous notre seule responsabilité que ce produit est conforme aux

paminėtus standartus arba nuostatus: atitinka 2011 m. birželio 8 d. Europos Parlamento ir Tarybos direktyvą 2011/65/EB dėl tam tikrų pavojingų medžiagų naudojimo elektros ir elektroninėje įrangoje apribojimo. (LV) Ir atbilstoša Eiropas Parlamenta un Padomes 2011. gada 8. jūnija Direktīvai 2011/65/

ES par dažu bīstamu vielu izmantošanas ierobežošanu elektriskās un elektroniskās iekārtās. (ET) Apgalvojam ar visu atbildību, ka šis produkts ir saskaņā un atbilst sekojošiem standar-

standards et directives suivants: est conforme à la Directive 2011/65/EU du Parlement Européen et du Conseil du 8 juin 2011 concernant la limitation d’usage de certaines substances dangereuses dans l’équipement électrique et électronique. (ES) Declaramos bajo nuestra exclusiva responsabilidad que este producto cumple con las

tiem un nolikumiem: ir atbilstoša Eiropas Parlamenta un Padomes 2011. gada 8. jūnija Direktīvai 2011/65/ES par dažu bīstamu vielu izmantošanas ierobežošanu elektriskās un elektroniskās iekārtās. (RO) Declarăm prin aceasta cu răspunderea deplină că produsul acesta este în

siguientes normas y estándares de funcionamiento: se encuentra conforme con la Directiva 2011/65/UE del Parlamento Europeo y del Consejo de 8 de junio de 2011 sobre la restricción del uso de determinadas sustancias peligrosas en los equipos eléctricos y electrónicos. (PT) Declaramos por nossa total responsabilida-de que este produto está em conformidade

conformitate cu următoarele standarde sau directive: este în conformitate cu Directiva 2011/65/UE a Parlamentului European şi a Consiliului din 8 iunie 2011 cu privire la interzicerea utilizării anumitor substanţe periculoase la echipamentele electrice şi electronice. (HR) Izjavljujemo pod vlastitom odgovornoĻśu da je strojem ukladan sa slijedeśim

e cumpre as normas e regulamentações que se seguem: está em conformidade com a Directiva 2011/65/EU do Parlamento Europeu e com o Conselho de 8 de Junho de 2011 no que respeita à restrição de utilização de determinadas substâncias perigosas existentes em equipamento eléctrico e electrónico. (IT) Dichiariamo, sotto la nostra responsabilità, che questo prodotto è conforme alle

standardima ili standardiziranim dokumentima i u skladu sa odredbama: usklađeno s Direktivom 2011/65/EU europskog parlamenta i vijeća izdanom 8. lipnja 2011. o ograničenju korištenja određenih opasnih tvari u električnoj i elektroničkoj opremi. (SR) Pod punom odgovornošću izjavljujemo da je usaglašen sa sledećim standardima ili

normative e ai regolamenti seguenti: è conforme alla Direttiva 2011/65/UE del Parlamento Europeo e del Consiglio dell’8 giugno 2011 sulla limitazione dell’uso di determinate sostanze pericolose nelle apparecchiature elettriche ed elettroniche. (SV) Vi garanterar på eget ansvar att denna produkt uppfyller och följer följande standarder

normama: usaglašen sa direktivom 2011/65/EU Evropskog parlamenta i Saveta od 8. juna.2011. godine za restrikciju upotrebe određenih opasnih materija u električnoj i elektronskoj opremi. (BG) Ние декларираме на наша отговорност, че този продукт отговаря на съответствие с

och bestämmelser: uppfyller direktiv 2011/65/EU från Europeiska parlamentet och EG- rådet från den 8 juni 2011 om begränsningen av användning av farliga substanser i elektrisk och elektronisk utrustning. (FI) Vakuutamme yksinomaan omalla vastuullamme, että tämä tuote täyttää seuraavat

Директива 2011/65/ЕС на Европейския парламент и на Съвета от 8 юни 2011 г. относно ограничението на употребата на определени опасни вещества в електрическото и електронното оборудване, в съответствие с следните стандарти и наредби (RU) Под свою ответственность заявляем, что данное изделие соответствует

standardit ja säädökset: täyttää Euroopan parlamentin ja neuvoston 8. kesäkuuta 2011 päivätyn direktiivin 2011/65/EU vaatimukset koskien vaarallisten aineiden käytön rajoitusta sähkö- ja elektronisissa laitteissa. (NO) Vi erklærer under vårt eget ansvar at dette produktet er i samsvar med følgende

следующим стандартам и нормам: соответствует требованиям Директивы 2011/65/EU Европейского парламента и совета от 8 июня 2011 г. по ограничению использования определенных опасных веществ в электрическом и электронном оборудовании (UK) На свою власну відповідальність заявляємо, що дане обладнання відповідає

standarder og regler: er i samsvar med EU-direktivet 2011/65/EU fra Europa- parlamentet og Europa-rådet, pr. 8 juni 2011, om begrensning i bruken av visse farlige stoffer i elektrisk og elektronisk utstyr. (DA) Vi erklærer under eget ansvar, at dette produkt er i overensstemmelse med følgende

наступним стандартам і нормативам: задовольняє вимоги Директиви 2011/65/ЄС Європейського Парламенту та Ради від 8 червня 2011 року на обмеження використання деяких небезпечних речовин в електричному та електронному обладнанні. (EL) Δηλώνουμε υπεύθυνα ότι το προϊόν αυτό συμφωνεί και τηρεί τους παρακάτω κανονισμούς

standarder og bestemmelser: er i overensstemmelse med direktiv 2011/65/EU fra Europa-Parlamentet og Rådet af 8. juni 2011 om begrænsning af anvendelsen af visse farlige stoffer i elektrisk og elektronisk udstyr. (HU) Felelősségünk teljes tudatában kijelentjük, hogy ez a termék teljes mértékben megfelel

και πρότυπα: συμμορφώνεται με την Οδηγία 2011/65/ΕΕ του Ευρωπαϊκού Κοινοβουλίου και του Συμβουλίου της 8ης Ιουνίου 2011 για τον περιορισμό της χρήσης ορισμένων επικίνδυνων ουσιών σε ηλεκτρικό και ηλεκτρονικό εξοπλισμό. (AR) :ةيلاتلا تاهيجوتلاو ريياعملا عم قفاوتي جتنملا اذه نأ اندحو انتيلوئسم ىلع نلعن (TR) Tek sorumlusu biz olarak bu ürünün aşağıdaki standart ve yönergelere uygun olduğunu

az alábbi szabványoknak és előírásoknak: je v souladu se směrnicí 2011/65/EU Evropského parlamentu a Rady EU ze dne 8. června 2011, která se týká omezení použití určitých nebezpečných látek v elektrických a elektronických zařízeních. (CS) Na naši vlastní zodpovědnost prohlašujeme, že je tento výrobek v souladu s

následujícími standardy a normami: Je v súlade s normou 2011/65/EÚ Európskeho parlamentu a Rady z 8. júna 2011 týkajúcej sa obmedzenia používania určitých nebezpečných látok v elektrickom a elektronickom vybavení. (SK) Vyhlasujeme na našu výhradnú zodpovednosť, že tento výrobok je v zhode a súlade s

beyan ederiz. (МК) Изјавуваме со наша целосна одговорност дека производот е во согласност со

Смерницата 2011/65/EU на Европскиот парламент и е во согласност според Советот од 9 јуни за ограничување на користење на одредени опасни супстанции во електричната и електронската опрема и дека е според следните стандарди и регулативи:

nasledujúcimi normami a predpismi: Je v súlade s normou 2011/65/EÚ Európskeho parlamentu a Rady z 8. júna 2011 týkajúcej sa obmedzenia používania určitých nebezpečných látok v elektrickom a elektronickom vybavení.

EN61029-1, EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3

2006/42/EC, 2014/30/EU, 2011/65/EU, 2012/19/EU

Zwolle, 01-03-2019 H.G.F. Rosberg CEO Ferm

  • Ferm
  • Lingenstraat 6
  • 8028 PM
  • Zwolle The Netherlands
Page 12 of the Ferm SSM1007 user manual — WWW.FERM.COM ©2019 FERM
Pagina 12 · klik om te vergroten
Pagina 12

WWW.FERM.COM ©2016 FERM B.V.

WWW.FERM.COM ©2019 FERM

1605-26 · 1903-21

Bronnen

Referenties en links

Pagina's waarnaar wordt verwezen in deze handleiding — fabrikant, ondersteuning en downloads.

Vraag stellen over de Ferm SSM1007

Eigenaren en ons team reageren doorgaans binnen een dag — en uw vraag helpt ook de volgende persoon.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
Nog geen vragen over de Ferm SSM1007

Stel als eerste een vraag — andere eigenaren of ons team geven antwoord.

Origineel document

Ferm SSM1007 handleiding-pdf

92 pagina's·9.9 MB·Zaagmachine·PDF
Klik op een bovenstaande pagina om deze hier te openen
Pagina 1 / …
100%
Pagina's laden…